4.
When the External Temperature changes, Check the temperature data.
Fig.1) External Temperature
Connect scantool to Data Link Connector (DLC).
Engine "ON".
Select the " External Temperature" parameter among Current Data.
When the External Temperature changes, Check the temperature data.
Fig.1) External Temperature
Is the parameter displayed within specifications?
 | ▶ Fault is intermittent caused by poor connection in FATC and SPAS ECU's connector or was repaired and SPAS ECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to "Termminal Connector Inspection" procedure. |
