GDS Diagnostics
1.

Connect GDS to Data Link Connector(DLC).

2.

Engine "ON" and Head lamp "ON".

3.

Erase the DTC with GDS.

4.

Is it possible to erase the DTC with GDS ?

▶ This is a intermittent problem caused by poor contact of component or Control Unit.

▶ Thoroughly check the looseness, poor connection, bent, corrison, contamination, deformation or damage of connector.

▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure.

▶ Go to "Inspection and Repair" procedure.

Яндекс.Метрика