Monitor GDS data
■ Check DTC
1.

Check DTC with GDS.

2.

Check DTC related CAN communication is set on Smartkey Module and every modules.

3.

If there is DTC related Module Check the DTC according to troubleshooting guide.

4.

Repair and erase the DTC with GDS.

5.

Is the DTC erased ?

▶ Check poor connection between harness connector and Smartkey Module or ECM/PCM :

Thoroughly check the looseness, poor connection, bent, corrison, contamination, deformation or damage of connector. Repair or replace as necessary Repair" procedure.

▶ Go to next procedure.

Яндекс.Метрика