Connect GDS to Data Link Connector(DLC).

IG "ON" or ENG "ON".

Check if the GDS displays a fault code.

Clear the fault code with the GDS, and then run the engine at 60 km/h to see if the Malfunction Indicator Lamp is turned on again.

Using the GDS, check if there is any fault in the MDPS system.

If there is a fault in the cluster system, repair the system, select the LKAS system and monitor the DTC.

	▶ Go to next procedure.
	▶ Repair as necessary and then go to "Verification of Vehicle Repair" procedure.