SPAS ECU controls Parking assist for drivers according to Variant Coding information (Region, AT, LHD/RHD, Bumper information)
After replacing new SPAS ECU, if Varant coding is not done, new SPAS ECU sets this DTC. In this case, new SPAS ECU memorize this DTC as present. After installation the New SPAS ECU without performing variant Coding, SPAS ECU controls to blink SPAS / PAS switch indicator. If varient coding is completed, this DTC is set as history and switch indicator is also turned to off.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
SPAS Coding status check | 1. No varient Coding on SPAS 2. SPAS ECU |
Enable Conditions |
•
IG ON. | |
Threshold vlaue |
•
No Varient Coding is performed | |
Diagnostic Time |
•
Right after No Varient Coding is detected | |
DTC Erasing Time |
•
- |
