Rear Side Airbag (hereinafter referred to RSAB) is located in driver and passenger side rear seat.
It protects passenger's head and shoulder in broad collision.
RSAB is consist of air bag and inflator.
Air bag reduces impact of collision by fillied up gas.
Inflator keeps gas and uses it to deploy air bag on collision.
Never measure resistance of RSAB directly, Current of measuring device may cause unexpected air bag deploy.
The SRSCM sets DTC B143500 if there is a short to ground in PRSAB harness.
*In this case, SRSCM checks if there's any fault in circuit by sending current for a while.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Resistance | 1. Short to ground in PRSAB harness. 2. Poor connection of connected part. 3. Poor connection between shorting bar and release pin. 4. Faulty PRSAB. 5. Faulty SRSCM. | |
Enable Conditions |
•
Ignition "ON" | ||
Threshold Value |
•
Short to ground in PRSAB | ||
Diagnostic Time | Qualification |
•
More than 1 sec | |
De-Qualification |
•
More than 2 sec | ||
Test Condition | Voltage |
Ignition ON | 1.0Ω ≤ Squib resistance ≤ 7.2Ω |
