Component Inspection
1.

Ignition "OFF".

2.

Disconnect IATS connector.

3.

Measure the resistance between signal terminal and ground terminal of the sensor connector(Component side).

Specification

Temp.(℃)

Temp.(℉)

Resistance(㏀)

Temp.(℃)

Temp.(℉)

Resistance(㏀)

-10

14

8.5 ~ 9.7

20

68

2.3 ~ 2.5

0

32

5.4 ~ 6.1

30

86

1.6 ~ 1.7

10

50

3.5 ~ 3.9

80

176

Approx. 0.3

4.

Is resistance within the specification ?

▶ Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "Verification of Vehicle Repair" procedure.

▶ Check IATS for contamination, deterioration, or damage. Substitute with a known-good IATS and check for proper operation. If the problem is corrected, replace IATS and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика