10679328

Component Inspection

Ignition "OFF" .

Disconnect injector connector.

Measure resistance between control terminal and power terminal of the injector connector(Component side).

Specification

Temp.(℃)	Temp.(℉)	Resistance (Ω)
20	68	13.8 ~ 15.2

Is resistance within the specification ?

	▶ Go to next step as below.
	▶ Check injector for contamination, deterioration, or damage. Substitute with a known-good injector and check for proper operation. If the problem is corrected, replace injector and then go to "Verification of Vehicle Repair" procedure.