ECM/PCM keeps internal counting to calculate the model values related to temperature under IG "OFF" condition. ECM/PCM uses this values to improve efficiency when the engine starts again.
If The deviation between the value by LPC and the value by internal counting is over 20 sec or ECM/PCM detects an error on internal memory, ECM/PCM sets P2610.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Soak time counter error | 1. ECM/PCM 2. Battery low-voltage | |
Enable Conditions | Case1 |
•
Engine "ON" > 10 sec.
•
Battery voltage > 8V | |
Case2 |
•
The internal memory is noraml. | ||
Threshold value | Case1 |
•
The deviation between the value by LPC and the value by internal counting > 20 sec | |
Case2 |
•
LPC is reset to "0" abnormally. | ||
Diagnosis Time |
•
- | ||
MIL On Condition |
•
3 driving Cycles | ||
* LPC(Low Power Counter) : Time counter after IG OFF
