3.
Measure resistance between MOTOR (+) and MOTOR (-) terminal of ACV.
Specification : Approx. 4.3 Ω (20℃)
IG KEY "OFF", ENGINE "OFF".
Disconnect ACV connector.
Measure resistance between MOTOR (+) and MOTOR (-) terminal of ACV.
Specification : Approx. 4.3 Ω (20℃)
Is the measured resistance within the specification?
 | ▶ Substitute with a known-good ECM and check for proper operation. If the problem is corrected, replace ECM as necessary and then,Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Replace ACV as necessary and then, Go to "Verification of Vehicle Repair" procedure. |
