6.
Does change of sensor power supply occur as connecting sensor connector?
 | ▶ Replace related sensors.(ACV. BPS, CAM, APS1) |
 | ▶ Go to "Verification of Vehicle Repair". |
IG KEY "OFF", ENGINE "OFF".
Disconnect ACV connector, BPS connector, CAM connector, APS1 connector.
Check that sensor connector power supply is within the specification after turning IG KEY "ON".
Connect ACV connector, BPS connector, CAM connector and APS1 connector in turn.
Measure the voltage of power circuit of each sensor with all connector connected.
Specification : sensor power supply should not change as connecting ACV connector, CAM connector, BPS connector, APS1 connector.
( If the change of sensor power supply occur as connecting sensor connector, this means the occurrence of short inside of sensor.)
Does change of sensor power supply occur as connecting sensor connector?
| ▶ Replace related sensors.(ACV. BPS, CAM, APS1) |
| ▶ Go to "Verification of Vehicle Repair". |
