3.
Measure resistance between signal terminal of IAT in BPS connector and ground terminal of BPS connector (component side)
Specification : Refer to Specification of General Information
IG KEY "OFF", ENGINE "OFF".
Disconnect BPS connector.
Measure resistance between signal terminal of IAT in BPS connector and ground terminal of BPS connector (component side)
Specification : Refer to Specification of General Information
Is the measured resistance at certain temperature within the specified resisance range at the temperature?
 | ▶ Go to "Verification of Vehicle Repair". |
 | ▶ Replace BPS assy' and go to "Verification of Vehicle Repair". |
