Monitor GDS Data
1.

Connect GDS to Data Link Connector (DLC).

2.

Warm engine up to normal operating temperature.

3.

Turn "OFF" electrical devices and A/C.

4.

Monitor "ECTS" parameter on the GDS.

Specification : Current enigne coolant temperature is displayed.

Fig.1) Check if 1) incorrect value is displayed 2) coolant temperature is fixed at 80℃ suddenly during driving 3)coolant temperature is fixed at -10℃ when turning IG KEY "ON". That coolant temperature is fixed at -10℃ or 80℃ means failure of ECTS.

To prevent overheat of engine due to ECTS , if ECTS fails, cooling fan operates continuously.

Яндекс.Метрика