Injectors jet out high pressure fuel caculated by ECM to each cyliders. Direct and separated injections improve fuel efficiency and engine power.
ECM shows P062E when the drive circuit of GDI injectors (2, 3) is abnormal.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Check the electrical signal | 1. Poor connection 2. Open in control circuit 3. Injector |
Enable Conditions |
•
Electrical fault with the drive circuit of GDI injectors | |
Threshold Value |
•
BUS communication error (Internal fault of ECM) | |
Diagnostic Time |
•
1.5sec | |
MIL ON Condition |
•
3 driving cycle |
Fig.1) Normal waveform of ING at idle.