Check golw relay component coil resistance
IG KEY "OFF", ENGINE "OFF".
Disconnect glow relay.
Measure the resistance of glow relay component coil.
Specification : 55±5 Ω (20°C)
Is the measured resistance within the specification?
 | ▶ Go to "2. Check glow relay component operation" as follows. |
 | ▶ Replace glow relay and go to "Verification of Vehicle Repair". |
Check glow relay component operation
IG KEY "OFF", ENGINE "OFF".
Disconnect glow relay.
Supplies random B+ and ground to coil sides of glow relay (terminal 85, terminal 86).
Check continuity between glow relay terminal 30 and terminal 87.
Specification : When power is supplied : Continuity ( below 1.0Ω )
When power is not supplied : Discontinuity ( Infinite Ω )
Is the measured resistance within the specification?
| ▶ Go to "Verification of Vehicle Repair". |
| ▶ Replace glow relay and go to "Verification of Vehicle Repair". |
※ Repeat this process 2~3 times.
