3.
Select "Oil Level-Raw Value" ,"Oil Temperature" ,"Oil Level-Filtered Value" "Oil Level-Last Averaged Value"
"Oil Status" parameters on the scan-tool.
Connect scantool to Data Link Connector(DLC).
Engine "ON".
Select "Oil Level-Raw Value" ,"Oil Temperature" ,"Oil Level-Filtered Value" "Oil Level-Last Averaged Value"
"Oil Status" parameters on the scan-tool.
Are parameters displayed within available range?
 | ▶ Goto the "Component Inspection Procedure" |
 | ▶ Check Engine oil level and Adjust Engine oil level properly.and then go to the "Component Inspection Procedure" |
