10732428

Component Inspection

Ignition "OFF"

Disconnect PCSV connector

Measure resistance between power terminal and signal terminal of PCSV connector(Component side).

Temp.(℃)	Temp.(℃)	PCSV Resistance(Ω)
20	68	19 ~ 22

Is resistance within the specification?

	▶ Go to next step as below.
	▶ Check PCSV for contamination, deterioration, or damage. Substitute with a known-good PCSV and check for proper operation. If the problem is corrected, replace PCSV and then go to "Verification of Vehicle Repair" procedure.