Disconnect the negative (-) battery terminal.

Remove the driver side crash pad side cover (A).

Remove the driver side crash pad garnish (A) after loosening the mounting screws.

Remove the driver side crash pad lower panel (A) after loosening the mounting screws and then disconnect the connectors (B).

Remove the driver side crash pad under cover (A) and then disconnect the connector (B).

Remove the driver side shower duct (A) after loosening the screw.

Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.

Install in the reverse order of removal.

Disconnect the negative (-) battery terminal.

Remove the passenger side crash pad under cover (A) and then disconnect the connector (B).

Remove the glove box & housing.

(Refer to BD group - "Interior")

Remove the passenger side shower duct (A) after loosening the screw.

Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.

Install in the reverse order of removal.