Check the audio remote control switch (A) for resistance between No.3 and No.5 terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
Volume down | 2 - 7 | 6.81 kΩ |
Volume up | 2 - 7 | 4.61 kΩ |
Mode | 2 - 7 | 2.11 kΩ |
Seek down | 2 - 7 | 1.11 kΩ |
Seek up | 2 - 7 | 430 Ω |
Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to Restraint - "Airbag Module")
Remove the steering wheel.
(Refer to Steering System - "Steering Column & Shaft")
Remove the steering wheel cover (A) after loosening the screws.
Remove the steering wheel remote control switch connector (A) after loosening the mounting screws.
Replace the fault switch after disengaging the fixing clip, if it is necessary.
Reassemble the steering wheel remote control switch after connecting the connector.
Reassemble the steering wheel.
Reassemble the driver airbag module.
Make sure the audio remote control switch and the airbag module connectors are plugged in properly.
