2.
Remove the crash pad center fascia panel (A), after loosening the mounting screws.
(Refer to Body - "Crash Pad")
Take care not to scratch the center fascia panel and related parts.
Ejact all the disc before removing the AVN head unit to prevent damaging the CD player's load mechanism.
Disconnect the negative (-) battery terminal.
Remove the crash pad center fascia panel (A), after loosening the mounting screws.
(Refer to Body - "Crash Pad")
Disconnect the center fascia panel connectors (B), after removing the air condition hose (A) from the upper side of center fascia panel.
Remove the AVN head unit (A) after loosening the mounting screws.
Remove the AVN head unit connectors and cables.
If CD does not eject, don't try to remove it.
The player may be damaged.
Therefore, contact a service shop for repairs.
Remove the rear roof trim.
(Refer to Body - "Roof Trim")
Disconnect the GPS (A) cable from the roof antenna.
Remove the roof antenna after removing a nut (A).
Connect the AVN head unit connectors and cable.
Install the AVN head unit.
Install the center fascia panel.
Connet the battery (-) terminal.
Make sure the AVN Head unit connectors are plugged in properly and the antenna cable is connected properly.
Installation the roof antenna.
Connect the GPS cable.
Install the rear roof trim.
Make sure that the cables and connectors are plugged in properly.
Check the AVN system.
