3.
Disconnect the power PTG spindle connector (A).
Disconnect the negative (-) battery terminal.
Remove the tailgate trim and Luggage side trim.
(Refer to Body - "Tailgate")
Disconnect the power PTG spindle connector (A).
Using a screwdriver (A), lift up slightly the socket clips (B) of both ends on the lifer (D), and then remove the PTG spindle from the bracket (C).
Take care not to be closed the tail gate, when removing the lift.
If it is necessary, remove the nuts and replace the PTG spindle bracket (A).
Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)
Connect the PTG spindle, bracket and connector.
Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)
Install the tailgate trim and Luggage side trim.
Connect the negative (-) battery terminal.
