4.
Remove the steering wheel cover (A) after loosening the screws.
Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to the RT group)
Remove the steering wheel.
(Refer to the ST group - "Steering column & shaft")
Remove the steering wheel cover (A) after loosening the screws.
Remove the steering wheel remote control switch connector (A) after loosening the mounting screws.
Install the hands free switch to the steering wheel.
Install the steering wheel.
Reassemble the driver airbag module.
Make sure the hands free remote control switch and the airbag module connectors are plugged in properly.
Check the audio remote control switch (A) for resistance between No.2 and No.5 terminals in each switch position.
Switch | Connector terminal | Resistance (±5%) |
Bluetooth off | 2-5 | 12.1 kΩ |
Bluetooth on | 2-5 | 34.1 kΩ |
Switch | Connector terminal | Resistance (±5%) |
Bluetooth off | 2-5 | 12.1 kΩ |
Bluetooth on | 2-5 | 34.1 kΩ |
Voice | 2-5 | 3.9 kΩ |
Switch | Connector terminal | Resistance (±5%) |
Disp | 2-5 | 180 Ω |
Trip | 2-5 | 330 Ω |
LKAS | 2-5 | 550 Ω |
Switch | Connector terminal | Resistance (±5%) |
Disp | 2-5 | 180 Ω |
Trip | 2-5 | 330 Ω |
Switch | Connector terminal | Resistance (±5%) |
Disp | 2-5 | 180 Ω |
Trip | 2-5 | 330 Ω |
Time | 2-5 | 880 Ω |
