2.
Ignitor
Ignitor (A) is an electromagnetic transformer that receives current from ballast and boost voltage to light on the arc light source in any environment.
Bulb
Elements
Xenon gas: Xenon gas activates the initial reaction for rapid illuminating.
Molybdenum electrode: anode arcing
Metal halide salts: color composing component
Lightening principle
When Xenon gas and metal halide salt will discharge the molybdenum anode in a capsule, it emits light.
Ignitor
Ignitor (A) is an electromagnetic transformer that receives current from ballast and boost voltage to light on the arc light source in any environment.
Ballast
Ballast (A) delivers an instant high voltage pulse to the ignitor electrode, to initialize discharge in the source.
Ballast supplies the stable power to the bulb and the ignitor during initialization and normal state of arc.
Stability
Durable for vibration as there is no filament.
Does not operate if polarity are changed.
Doesn't operate if the input voltage is not in the range of 10-16V.
Doesn't operate if the circuit is short.
Doesn't operate if the bulb burnt out.
When visiting a country with opposite traffic direction use this function to avoid the dazzle on oncomming vehicle drivers.
Stop the vehicle with the engine running.
Change the switch from the park lamp position to head lamp low position 10 times within 15 seconds.
A beep sound will be heard 3 times to notify you the change has been made successfully.
To cancel the change, follow the above procedure again.
If the engine is rutned off with the traffic change function activated, and the engine turned on again, a beep sound will be heard 3 times.
