4.
Disconnect the electronic steering column lock connector (A).
Disconnect the negative(-) battery terminal.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad")
Remove the steering column upper and lower shrouds.
(Refer to Body - "Crash Pad")
Disconnect the electronic steering column lock connector (A).
Remove the electronic steering column lock.
(Refer to the ST group - "Steering column and shaft")
Install the electronic steering column lock (A).
Do not reuse the shear bolts.
When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.
Tightening torque :
7 ~ 13 N.m (0.7 ~ 1.3 kgf.m, 5 ~ 9.4 lb.ft)
Install the steering column.
Install the crash pad lower panel.
