3.
Disconnect the EPB actuator connector (A).
Remove the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Release the parking brake.
Disconnect the EPB actuator connector (A).
Disconnect the brake hose from the brake caliper by loosening the bolt (B).
Does not loosen the hose eyebolt to replace the rear disc.
Fix the rear brake caliper with wire to the other components after loosen the brake caliper mounting bolts.
Loosen the bolt & nut and then disconnect the shock absorber (A) with the rear axle.
Tightening torque :
137.3~156.9N.m(14.0~16.0Kgf.m, 101.3~115.7lb-ft)
When removing the bolt, remove the shock absorber in no-load condition by using the transmission jack.
Remove the rear upper arm (A).
Must be separate the upper arm & upper arm mounting bolt at the rear carrier assembly before remove the rear brake caliper.
When removing the bolt, remove the upper arm in no-load condition by using the transmission jack.
Loosen the caliper mounting bolts (A) and then remove the rear caliper assembly (B).
Tightening torque:
49.0 ~ 58.8 N.m (5.0 ~ 6.0 kgf.m, 36.2 ~ 43.4 lb-ft)
Remove the rear brake disc by loosening the screws (A).
