2.
Remove the drive belt.
(1)
Loosen the alternator mounting bolts (A).
(2)
Loosen the tension by turning the tension adjusting bolt (B) counterclockwise.
(3)
Remove the drive belt (C).
Disconnect the battery negative terminal first, then the positive terminal.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 Ib-ft)
Remove the drive belt.
Loosen the alternator mounting bolts (A).
Loosen the tension by turning the tension adjusting bolt (B) counterclockwise.
Remove the drive belt (C).
Disconnect the alternator connector (A) and the cable (B) from alternator "B" terminal.
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)
Pull out the through bolt and then remove the alternator (A).
Tightening torque
M10 bolt:
29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)
M8 bolt:
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 Ib-ft)
Installation is the reverse order of removal.
