3.
Loosen the wheel guard (A) mounting screws and clips.
When removing and installing the fender, an assistant is necessary.
Be careful not to damage the fender and body.
When removing the clips, use a clip remover.
Remove the front bumper cover.
(Refer to the BD group – “Front bumper”)
Remove the head lamps.
(Refer to the BE group – “Head Lamps")
Loosen the wheel guard (A) mounting screws and clips.
After loosening the mounting screws and clips, then remove the side sill molding (A).
Using a screwdriver or remover, remove the delta garnish (A).
Remove the fender side weatherstrip (A).
After loosening the mounting screw and bolts, then remove the front bumper side mounting bracket (A).
After loosening the mounting bolts and nut, then remove the fender (A).
Install in the reverse order of removal.
