1.
Loosen the radiator upper cover (A) mounting clips and bolts.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trip pieces to without marring the surface.
Take care not bend or scratch the cover and other parts.
Loosen the radiator upper cover (A) mounting clips and bolts.
Remove the front bumper lower mounting clips.
After loosening the front bumper side’s mounting screw, then disconnect the side’s.
When you pull out the front bumper, the front bumper could be damaged by the projection.
Disconnect the fog lamp connector (A) and front sensor connector (B).
Remove the front bumper cover (A).
Install in the reverse order of removal.
Make sure the connector is plugged in properly.
Replace any damage clips.
