1.
Remove the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
note
Be careful not to damage the hub bolts when removing the rear wheel & tire.
Remove the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage the hub bolts when removing the rear wheel & tire.
Loosen the bolt & nut and then disconnect the shock absorber (A) with the rear axle.
Tightening torque :
137.3~156.9N.m(14.0~16.0Kgf.m, 101.3~115.7lb-ft)
When removing the bolt, remove the shock absorber in no-load condition by using the transmission jack.
Loosen the bolt & nut and then remove the rear upper arm (A) from the rear axle.
Tightening torque:
137.3 ~ 156.9N.m(14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)
Must be separate the upper arm & upper arm mounting bolt at the rear carrier assembly before remove the rear brake caliper.
When removing the bolt, remove the upper arm in no-load condition by using the transmission jack.
Loosen the bolt & nut and then remove the rear upper arm (A) from the sub frame.
Tightening torque:
156.9 ~ 176.5N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)
Installation is the reverse of removal.
Install the rear upper arm so that the letter "R" can face the rear of vehicle.
Check the wheel alignment.
(Refer to SS group - "Tires/Wheels")
Check the bushing for wear and deterioration.
Check the rear lower arm for deformation.
Check the coil spring and spring pad for deterioration and deformation.
Check for all bolts and nut.
