1.
Remove the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9 N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
caution
Be careful not to damage the hub bolts when removing the rear wheel & tire.
Remove the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9 N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage the hub bolts when removing the rear wheel & tire.
Remove the sprit pin and castle nut and then disconnect the rear assist arm (A) from the rear axle.
Tightening torque:
78.5 ~ 98.1N.m(8.0 ~ 10.0kgf.m, 57.9 ~ 72.3lb-ft)
Loosen the bolt & nut and then remove the rear assist arm (A) from the sub frame.
Tightening torque:
107.9 ~ 117.7N.m(11.0 ~ 12.0kgf.m, 79.6 ~ 86.8lb-ft)
Installation is the reverse of removal.
Check the bushing for wear and deterioration.
Check for all bolts and nut.
