Component Inspection
■ Actuator Test Check
1.

Connect GDS to Data Link Connector(DLC)

2.

IG key "ON"

3.

Perform Actuator Test with GDS.

4.

After Actuation Test, monitor diagnostic trouble code on the GDS.

5.

Are any DTCs present ?

▶ Substitute with a known-good Head lamp and check for proper operation. If problem is corrected, replace Head lamp and then go to "Verification of Vehicle Repair" procedure.

▶ Fault is intermittent caused by AFLS ECU memory was not cleared. and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика