10689456

1.

Connect GDS to data link connector(DLC).

2.

IG key "ON" , Engine "ON".

3.

Warm up the engine to normal operating temperature.

4.

Monitor diagnostic trouble code and present of trouble code.

5.

Are any DTCs present ?

	▶ Go to "Inspection / Repair" procedure.
	▶ Fault is intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and AFLS ECU memory is not cleared yet. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination or damage.