Component Inspection
■ Check EPB actuator
1.

Ignition "OFF"

2.

Disconnect both connector to left/right actuators and connect right wiring to left actuator.

3.

IGN ON, then try EPB apply/release several times to see whether the same DTC happens for right side.

4.

Does same DTC occurs for right side? (C2224)

▶ Substitute with a known-good EPB actuator and check for proper operation. If the problem is corrected, replace EPB actuator and then go to "Verification of Vehicle Repair" procedure.

▶ It is not the problem with left actuator. Check wiring and connector for left side.

Яндекс.Метрика