Disconnect the battery negative cable and wait for at least three minutes before beginning work.

Remove the door scuff trim.

(Refer to Body - "Interior Trim")

Remove the center pillar trim.

(Refer to Body - "Interior Trim")

Disconnect the side impact sensor connector (B).

Loosen the side impact sensor mounting bolt (A) and remove the side impact sensor.

Disconnect the battery negative cable and wait for at least three minutes before beginning work.

Remove the rear seat side back assembly.

(Refer to Body - " Rear Seat")

Disconnect the rear side impact sensor connector (B).

Loosen the rear side impact sensor mounting bolt (A) and then remove the rear side impact sensor.