1.
Fix the brake pedal arm and insert fully the stop lamp switch as hiding contact part.
Fix the brake pedal arm and insert fully the stop lamp switch as hiding contact part.
After inserting, turn the stop switch (A) 45° clockwise, and then assemble locking plate (B) by pushing.
Confirm the gap between stop lamp switch and bracket.
Stop lamp clearance : 1.0 ~ 2.0 mm (0.04~ 0.08 in.)
Connect the stop lamp switch connector.
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), perform the above process again.
Install the lower crash pad.
(Refer to the Body - "Crash Pad")
