1.
Remove the alternator cover after loosening the B terminal mounting nut(A) and rear cover nut(B).
Remove the alternator cover after loosening the B terminal mounting nut(A) and rear cover nut(B).
Loosen the mounting bolts(A) and disconnect the brush holder assembly(B).
Remove the OAD(Overrunning Alternator Decoupler) cap.
When installing, replace with new OAD cap.
Remove the OAD(Overrunning Alternator Decoupler) pulley(A) using the special tool.
Unsolder the 3 stator leads(A).
Loosen the 4 through bolts(A).
Disconnect the rotor(A) and bracket(B).
Reassembly is the reverse order of disassembly.
