Disassembly
1.

Remove the alternator cover (A).

2.

Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).

3.

Remove the slip ring guide (A).

4.

Remove the OAD (Overrunning Alternator Decoupler) cap. (With OAD)

note

When installing, replace with new OAD cap.

5.

Remove the OAD (Overrunning Alternator Decoupler) pulley (A) using the special tool. (With OAD)

6.

Remove the nut and pulley (A). (Without OAD)

7.

Loosen the 4 through bolts (A).

8.

Disconnect the rotor (A) and cover (B).

9.

Reassembly is the reverse of disassembly.

Яндекс.Метрика