2.
Retighten the oil filler plug (A) with a new washer.
Park the vehicle on a level ground and stop the engine.
Retighten the oil filler plug (A) with a new washer.
Check level with finger.
Oil level must be up to fill the hole, if not, add oil until it runs over.
Install filler plug.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
Park the vehicle on a level ground and stop the engine.
Drain the manual transaxle oil after loosening the drain plug (A).
Install the drain plug with new gasket.
Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)
Add new oil through the filler plug hole and, fill it just below the plug opening.
Standard oil: SAE 75W/85, API GL-4
Oil capacity: 1.9 ~ 2.0L (0.50 ~ 0.53 U.S.gal., 2.01 ~ 2.11 U.S. qt., 1.67 ~ 1.76 lmp qt.)
