Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning. If the quality is visibly poor, replace the oil.
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes then check the oil level. Oil level should be between the "L" and "F" marks on the dipstick. If low check for leakage and add oil up to the "F" mark.
Do not fill with engine oil above the "F" mark.
If not available, refer to the recommended ACEA, API or ILSAC classification and SAE viscosity number.
For Europe and General : 5W-20/GF4 & SM
For Middle East: 5W-30/ACEA A5
For Europe and General : API SL, SM or above
ILSAC GF4 or above
For Middle East: ACEA A5
API SL, SM or above
ILSAC GF4 or above
Refer to the recommended SAE viscosity number
For best performance and maximum protection of all types of operation, select only those lubricants which :
Satisfy the requirement of the ACEA, API or ILSAC classification.
Have proper SAE grade number for expected ambient temperature range.
Lubricants that do not have both an SAE grade number and ACEA, API or ILSAC service classification on the container should not be used.
