Disconnect the negative (-) battery terminal.

Remove the driver side crash pad side cover (A).

Remove the crash pad garnish (A) after loosening the mounting screws.

Remove the crash pad lower panel (A) after loosening the mounting screws and then disconnect the connectors (B).

Remove the driver side crash pad under cover (A) and then disconnect the connector (B).

Remove the driver side shower duct (A) after loosening the screw.

Remove the accelerator pedal.

(Refer to FL group - “Accelerator Pedal”)

Disconnect the connector (A) and then remove the mode control actuator (B) after loosening the mounting screws.

Install in the reverse order of removal.