3.
Disconnect the push rod from the clutch pedal by removing the snap pin (A) and washer.
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the crash pad lower panel.
(Refer to "Interior (Crash pad)" in BD group)
Remove the junction box.
(Refer to "Fuses And Relays (junction box)" in BD group)
Disconnect the push rod from the clutch pedal by removing the snap pin (A) and washer.
Disconnect the ignition lock switch connector (A) and clutch switch (B), stroke sensor (C).
Remove the clutch pedal mounting bolt (A) or nuts (B-2ea).
Tightening torque:
(A,B) 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
