2.
Discoonnect the damper (B) after removing the comcentric slave cylinder clip (A).
Remove the transaxle assembly.
(Refer to "Manual transaxle" in MTB group)
Discoonnect the damper (B) after removing the comcentric slave cylinder clip (A).
Remove the concentric slave cylinder assembly (B) from the transaxle case by removing bolts (A-3ea).
Tightening torque:
11.8 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.7 ~ 10.8 lb-ft)
Remove the concentric slave cylinder assembly (A).
