Installation is reverse of removal.
Accelerator pedal installation bolt:
8.8 ~ 14.7 N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1 lb-ft)
Accelerator pedal module installation nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
When replacing or reinstalling the accelerator pedal, step on the accelerator pedal fully to the end for 1 sec in IG key on position.
Through this procedure, ECM learn full accelator position of the APS.
