3.
Disconnect the starter cable (A) from the B - terminal on the solenoid and the connector (B) from the S terminal.
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Disconnect the battery negative cable.
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
Remove the air duct and air cleaner assembly. (Refer to EM group - "Engine and transaxle assembly")
Disconnect the starter cable (A) from the B - terminal on the solenoid and the connector (B) from the S terminal.
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Remove the starter (A).
Tightening torque:
49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Installation is the reverse of removal.
