2.
Using the hexagon wrench, turn the tensioner (A) counterclockwise and loosen. Then remove the drive belt (B).
Disconnect the battery negative terminal first, then the positive terminal.
Tightening torque :
(+) terminal :
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
(-) terminal (with battery sensor):
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
Using the hexagon wrench, turn the tensioner (A) counterclockwise and loosen. Then remove the drive belt (B).
Disconnect the alternator connector(A), and remove the cable(B) from alternator "B" terminal.
Remove the under cover. (Refer to EM group)
Remove the RH front wheel. (Refer to SS group)
Disconnect the RH front strut assembly. (Refer to SS group)
Remove the alternator(A).
Tightening torque :
38.2 ~ 58.8N.m (3.9 ~ 6.0kgf.m, 28.2 ~ 43.4lbf.ft)
Installation is the reverse order of removal.
