Check that the switch operates properly after disconnecting the room lamp connector (A).

Disconnect the negative(-) battery terminal.

Carefully remove the room lamp lens (B) using a small screwdriver.

After loosening the mounting screws, then remove the room lamp (A).

Disconnect the room lamp connector (A).

Disconnect the negative(-) battery terminal.

Remove the room lamp (A) using a screwdriver or remover and then disconnect the connector (B).

Disconnect the negative (-) battery terminal.

Remove the vanity lamp (A) using a screwdriver or remover and then disconnect the connector (B).

Reconnect the connector.

Install the room lamp assembly.

Install the lens.

Reconnect the vanity lamp connector.

Install the vanity lamp.