2.
Disconnect the differential pressure sensor connector (A) and the Lambda sensor connector (B).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the differential pressure sensor connector (A) and the Lambda sensor connector (B).
Disconnect the exhaust gas temperature sensor connector (A).
Remove the heat protector (B) after removing 3 bolts.
Remove the cowl cover for securing the working space (Refer to "Exterior" in BD group).
Disconnect the hoses (A) connected with the differential pressure sensor from the DPF assembly.
Remove the DPF assembly (A) after removing the mounting bolts/nut (B) from the turbo charger (C).
DPF assembly mounting bolt/nut:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
Lift the vehicle and remove the front muffler assembly (A) and the DPF assembly stay (B).
DPF assembly stay mounting bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
Front muffler assembly mounting nut:
39.2 ~ 58.8 N.m (4.0 ~ 6.4 kgf.m, 28.9 ~ 43.4 lb-ft)
Remove the DPF assembly from the vehicle by lifting it upward.
