3.
After loosening the mounting bolt, then remove the seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
When installing the belt, make sure not to damaged the pretensioner.
Remove the following items first.
Front seat assembly
(Refer to the BD group - "Front Seat")
Front door scuff trim & Rear door scuff trim
(Refer to the BD group - "Interior Trim")
Remove the seat belt lower anchor cover (B).
After loosening the mounting bolt, then remove the seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Using a screwdriver or remover, remove the center pillar lower trim (A).
Using a screwdriver or remover, remove the center pillar upper trim (A).
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
After disconnecting the pretensioner connector lock pin, remove the SIS connector (B), loosen the mounting bolts, then remove the pretensioner (A).
Tightening torque :
39.2~53.9 N.m (4.0~5.5 kgf.m, 28.9~39.8 lb-ft)
Install in the reverse order of removal.
Make sure the connector is plugged in properly.
Replace any damaged clips.
Remove the following items first.
Front seat assembly
(Refer to the BD group – “Front Seat”).
Front door scuff trim & Rear door scuff trim
(Refer to the BD group - "Interior Trim")
Front seat belt lower anchor
Center pillar lower trim
(Refer to the BD group - "Interior Trim")
Center pillar upper trim
(Refer to the BD group - "Interior Trim")
Front seat belt upper anchor
After loosening the mounting bolts, then remove the height adjustor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Make sure the connector is plugged in properly.
Replace any damaged clips.
Remove the following items first.
Front seat assembly
(Refer to the BD group - "Front Seat")
Disconnect the seat belt buckle connector (A).
After loosening the mounting bolt, then remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Install in the reverse order of removal.
Make sure the connector is plugged in properly.
