The TCM sets this code when the INHIBITOR Switch outputs multiple signals for more than 2 seconds.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Check for No signal | 1. Open or short in circuit 2. Faulty Shift cable adjustment 3. Faulty Inhibitor switch and Manual control lever position adjustment 4. Faulty INHIBITOR SWITCH 5. Faulty TCM(PCM) |
Enable Conditions |
•
Battery voltage is above 10V | |
Threshold Value |
•
Multiple signal | |
Detecting Time |
•
More than 2 second | |
Fail Safe |
•
Normal Driving |
