If Error signal of neutral gear switch is detected for certain amount of time, ECM sets DTC P082000. This fault might be caused by open or short to power/ground in signal circuit of neutral gear switch.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Open or short to power/ground in signal circuit of neutral gear switch 2. Defected neutral gear switch | |
Enable Conditions |
•
Driving condition | ||
Threshold Value |
•
Neutral gear switch signal is not detected for 20 sec
•
Neutral gear switch position signal is not changed while vehicle speed is increased to 80km/h(50mph) | ||
Fail Safe | Engine OFF |
•
No | |
EGR Off |
•
No | ||
Torque Limit |
•
No | ||
MIL |
•
Off | ||
